Trang chủGian hàngDụng cụ vặn ốc dùng pin Panasonic và UryuDụng cụ PanasonicSúng vặn bulong Panasonic EYFPA1J
Mô tả
Chuck Size | 19mm Square Drive Pin-hole type | |
---|---|---|
Application | M16 (High-Tensile bolt), M18 (Normal, High-Tensile bolt) M20 (Normal bolt), M24 (Normal bolt) | |
Maximum torque | approx.700 N·m (M24 Tensile bolt, F mode, fastening 3sec.) approx.750 N·m (M24 Tensile bolt, F mode, fastening 5sec.) | |
Torque control function operating range | approx. 160—650 N·m | |
Torque Setting | 30 stage + F (without torque setting mode) | |
Flush Detection Mode Applications | L1: For lighter loads during fastener run down L2: For prevailing torque during run down and varying joint rate applications |
|
No load speed (unit : rpm) | 0 ~ 1900 | |
Impact per minute | 0 ~ 2200 | |
Weight*1 (inc. battery) |
approx. 3.6kg | |
Size | Length | 250mm |
Height | approx. 295mm | |
Width | approx. 77mm (Width of battery pack: approx. 77mm) | |
Function | Torque Adjustment | |
Cross Thread Reduction | (The tool rotates approx. 360 degree in reverse before fastening starts. Possible to choose ON/OFF) | |
Rundown Error Detecting | (Alert with Red light. Possible to set between 0 ~ 3 sec.. 0.1 sec. per stage) | |
Maintenance Interval Alarm Function | (Possible to set between 0 – 990,000 times. 10,000 times per stage) | |
LED Light | (Possible to choose from the 2 LED light modes. by ON/OFF switch or trigger switch interlocked) | |
Buzzer | (Possible to choose from the 3 buzzer modes, No buzzer, buzzer with OK or buzzer with NOK) | |
Tightening confirmation lamp | (OK fastening: Green lamp. NOK fastening: Red lamp) | |
Battery indication lamp | (3 stage) | |
Auto-Power Stop function | ||
Application Capacity/ Working Speed | approx.450pcs/pack | |
Charging time | Usable Charge: approx. 65 min. Full Charge: approx. 85 min (Battery pack EYFB60B, Charger EY0L82B) |